Antigravity Micro-Start Battery Harness Kit XP-Sport, XP-1, XP-3, & XP-5 , XP-10 and Sport
The MICRO-START Harness Kit was made so that a rider or driver can easily jump start their vehicle using just the MICRO-START without the need for the clamps, or removing the seat on your motorcycle. It is a 12" (300mm) harness that connects directly to the battery while the other end can plug directly into the MICRO-START unit. It adds convenience and saves time if the situation arises when you have to jump start your vehicle...Just connect the MICRO-START directly to this harness and jump-start your vehicle. Also included in the kit is an adapter that converts the Micro-Start Harness (BLUE CONNECTOR) down to an SAE Connector (Battery Tender type) so you can easily hook up your battery charger and eliminate the standard SAE harness you might have.
A standard Battery Tender type Harness WILL NOT handle jump-starting... the wire gauge is much to thin and it will melt the wires.
PLEASE NOTE: THE MICRO-START IS FOR JUMP-STARTING ONLY THROUGH THE JUMP START PORT!!!! NEVER LEAVE THE MICRO-START CONNECTED TO YOUR VEHICLE'S BATTERY OR USE IN PLACE OF YOUR REGULAR BATTERY!!! DO NOT TRY TO CHARGE THE MICRO-START DIRECTLY FROM YOUR BATTERY THROUGH THE JUMP START PORT. SEVERE DAMAGE CAN RESULT!
- 1pc MICRO-START harness (12" long)
- 1pc MICRO-START to SAE reducer (allows for hooking up standard Battery Tender (SAE) type charger to MICRO-START harness.