Please Call 510-586-8447 if you do not see the mounts or kit you would like or for any questions.
Dixi 10000+ Total Lumens LED Lights by Clearwater Lights (pair) Made in USA
Dixi is a new light that uses (10) high power Cree LEDs. “Dix” (pronounced Deece) is French for the number ten. In keeping with our whimsical product naming format, we came up with Dixi, pronounced Dicks-E.
Dixi incorporates two different beam patterns that can be used. There are three LEDs in the center and seven LEDs around the outside. The outside group is basically a Sevina pin spotlight using seven 8 degree optics. The center three LEDs use a Darla optic which provides a driving beam. But, the center light is more powerful than a Darla as we use the control circuit from a Krista!
When combined on full power, Dixi produces over 10,000 lumens each, that's over 20,000 lumens per pair.
In the normal configuration, the center Darla optic has adjustable intensity via our rotary controller or via the Wonderwheel on certain late model BMW motorcycles. The outer spot pattern is activated when the high beam headlight is activated. So, the inner light is adjustable when your low beam headlight is on.
This light has great applications for use on many vehicles. As a single versatile light, it can be conspicuity light or a long-range driving light.
- Center beam 30 watts, 3000+ lumens, adjustable intensity
- Outer beam 70 watts, 7000+ lumens, on or off with high beam
- 5.3" diameter
- 10,000+ total lumens each
- 36 ounces
- Fully dimmable
- Custom tooled optics
- CNC machined
- Pair of Dixi LED Lights - Bike specific wiring harness with CANopener if applicable
- Mounting brackets with stainless steel hardware
- Night driving
- Off-Road Vehicles
The Clearwater Lights™ Advantage
Clearwater Lights™ are high powered, fully dimmable LED lights that provide longer life and lower power consumption than other light systems.
The innovative, patent pending technology behind Clearwater Lights was born out of frustration with existing incandescent filament bulb technology. Incandescent bulbs, including halogen, rely on a high resistance wire that glows when electricity flows through it. The light output is just a by-product, so over 90% of the power to a halogen light is wasted in heat. There had to be a brighter way.
Join the many serious riders who are experiencing the Clearwater Lights advantage. Set of 2” lights that can be mounted on the bike in several locations. Mounting kits are listed under manufacturer list. The Darla LED Light makes your bike more visible to oncoming traffic during the day and at night provides a wide pattern of light which adds to side illumination. They are a combination of a fog and visibility light meant to make you more conspicuous.
Clearwater Lights are compact, easy to mount and simple to install. In order to maximize the full potential of HPLEDs, Clearwater uses advanced microprocessor controlled circuits to keep light output constant at a wide range of voltages. Because we use programmable circuits to control the power, we can even remotely adjust brightness!
What Are HPLEDs?
High Power LEDs (HPLEDs) are a new generation technology ideally suited for the unique demands of today’s motorcycles. Providing higher output with lower power consumption – dramatically increasing your level of safety and reliability. The Clearwater Lights HPLED revolution is here! Clearwater HPLEDs Easily Surpass Halogen for Output and Efficiency.
Why Control Brightness?
The unique brightness control circuit uses a rotary volume control to digitally change brightness in a wide range of intensity. The soft rubber knob is easily adjusted, even with gloves. It conveniently mounts on a handlebar or in a faring.
Clearwater Lights let the rider easily adjust the light output to the needs of changing road conditions. Because they don’t need to be turned off, safety is never compromised.
Auxiliary lights are often avoided because of the added glare imposed on oncoming traffic – they’re just too bright. But turning off these lights decreases the rider’s visible “signature” for oncoming drivers, increasing the danger to the rider.
How Strong are These Lights?
Each light is either CNC machined or forged from billet. Brackets are machined from 6061 series aluminum and use durable stainless steel hardware. The internal circuit boards are actually bonded to an additional aluminum plate for strength and heat management. Surface treatments consist of BOTH hard anodize and powder coating on certain models.
Can I Install it Myself?
Yes, you can! Clearwater has a long history of designing and manufacturing quality products that are consumer-friendly. Instructions and owners’ manuals are written with the home consumer in mind. On site installation is available at our Hayward, CA facility.
Why Buy Clearwater Lights?
Clearwater Company has been offering award winning customer service, well-engineered products and outstanding product support for over 23 years. Their products are manufactured in their Northern California facility and shipped all over the world.