Rox Riser Video Review and Installation for BMW R1200GS Liquid Cooled by Adventure Designs
|Rox Riser Video Review and Installation for BMW R1200GS Liquid Cooled by Adventure Designs |
Chad of https://www.advdesigns.com/ talks aobut and shows the installation of the Rox Risers on the new Liquid Cooled BMW R1200GS. The installation of Rox Risers is virtually the same for most motorcycle models and ajustment is the same as well. Just remember when ordering to choose a Rox Riser with the same bar / riser diameter which is usually 7/8", 1", 1-1/8" and 1-1/4" and then choose your height.
Shop Rox Risers here:
Thank you for watching. Until next time, take care and ride safe.
Chad & the Adventure Team
Improve riding comfort on and off road by installing a Rox Handlebar Riser on your BMW R1200GS motorcycle. The risers allow users to adjust the height of their handlebars for better comfort and improved handling. Rox Risers come in 2 styles: pivoting and 1 1/2-inch block risers. All Rox Risers are made in the U.S. for superior quality and install in just minutes for a quick and easy customization option that anyone can do at home.
The 1 1/2-inch block riser is the most basic design available. It simply raises the handlebar to a more comfortable height for taller riders. The solid design of the riser gives it a very durable and stable feel when installed. The simple design has little visual impact on the bike and will not interfere with other accessories.The pivoting riser is a more complex design that can be used for on or off-roading purposes. The pivoting riser allows you to customize your handlebar's height, so you can go from on road use to off road use in just moments. Once installed, 2 bolts in the back of the riser can be loosened to allow the handlebar to go up and down as desired. Raise the handlebar up for off road use and then lower it again for the ride home. The pivoting design delivers a smooth motion to make major or minor adjustments easy.
To install your new Rox Riser you will need a T45 torx bit, a 6 mm hex or Allen wrench and a ratchet. To start installation, carefully remove the handlebar from the bike using the 4 bolts that hold it in place. Carefully place the handlebar on the bike while you install the risers on to the handlebar mount. Attach the risers with the included bolts and then reattach the handlebar to the bike on top of the risers. Tighten all connections once the handlebar is in place.
Once installed, sit on the bike and make minor adjustments to the angle of the handlebar as needed to improve comfort. Rox Risers are made in the U.S. using high-quality materials and are a great addition to any BMW R1200GS motorcycle. Order yours today to take your adventure riding to new heights.