Star brite Star-Cool Premium Synthetic PG Engine Coolant 64oz
Star briteŽ worked with the worlds leading formulators of coolant additives to develop a product that significantly outperforms traditional coolants and helps engines develop maximum horsepower. Star CoolŽ combines an essentially non-toxic propylene glycol base with unique poly organic additives (POAT) to create the most technologically advanced engine coolant.
Star CoolŽ is the best choice for all high-performance engines. With a service life of up to 2+ years, 250,000 miles or 4,000 hours in gasoline engines (750,000 miles, 7+ years or 12,500 hours in diesel engines) it goes significantly beyond all OEM specifications. Star CoolŽ passivates metal surfaces to create a barrier to corrosion and will seal pinhole leaks or small cracks. Pre-mixed with de-ionized water, it is ready to use and safe for all water-cooled gas or diesel-powered engines. Star CoolŽ is ideal for year-round use; protecting against boilover to 265°F and freezing to -26°F (with 15 psi cap).
- Revolutionary PCT additive package maintains engine temperature to develop maximum horsepower
- Reduces operating temperatures faster than other coolants
- Meets or exceeds all OEM and appropriate ASTM specs
- Formulated to seal pinhole leaks or fissures
- Non-toxic propylene glycol formula will not clog radiators
- Ideal for year-round use; Protects against boilover to 265°F and freezing down to -26°F
- Compatible with all other coolants; can be used to top off or as a flush & fill
- Packaging is legal in all 50 states
- Available in Gallon and 64 oz
Do not remove radiator cap if hot. Refer to Manufacturers Engine Service Manual for flushing and filling DIRECTIONS. If none are available:
1. Check cooling system for leaks, loose connections or worn parts.
2. Remove radiator cap, open radiator and engine block drains, then flush system completely with clean water.
3. Close radiator and engine block drains when all water is drained out of system.
4. Fill system with Star briteŽ Star CoolŽ Synthetic Engine Coolant. DO NOT ADD WATER. Make sure that the level is slightly lower than the filler neck.
5. Run the engine for 5-10 minutes to reach normal temperature; the thermostat should now open, releasing any trapped air. If necessary, add more solution to fill radiator.
6. Finally, replace radiator cap and check for any leaks.